impressive skills
令人印象深刻的技能
very impressive
非常令人印象深刻
impressive performance
令人印象深刻的表演
impressive results
令人印象深刻的结果
impressive progress
令人印象深刻的进步
impressive achievement
令人印象深刻的成就
the pressive force from the clamp held the panels tightly in place.
夹具的压力将面板牢牢地固定到位。
engineers measured the pressive strength of the concrete after seven days.
工程师们在七天后测量了混凝土的抗压强度。
the design relies on pressive stress to keep the arch stable.
该设计依靠抗压应力来保持拱的稳定性。
under pressive load, the column must resist buckling.
在抗压载荷下，该柱必须抵抗屈曲。
the lab applied a steady pressive pressure to the sample for one hour.
实验室将稳定的抗压压力施加到样品上一个小时。
high pressive strain can cause microcracks in brittle materials.
高抗压应变会导致脆性材料产生微裂纹。
the pressive modulus increased after the polymer was cured.
聚合物固化后，抗压模量增加。
they recorded the maximum pressive resistance before the joint failed.
他们记录了在连接失效前的最大抗压强度。
a uniform pressive constraint kept the gasket from leaking.
均匀的抗压约束防止了垫片泄漏。
the simulation showed uneven pressive distribution along the beam.
模拟显示梁沿长度方向的抗压分布不均匀。
with insufficient pressive support, the foam deformed permanently.
如果抗压支撑不足，泡沫会永久变形。
impressive skills
令人印象深刻的技能
very impressive
非常令人印象深刻
impressive performance
令人印象深刻的表演
impressive results
令人印象深刻的结果
impressive progress
令人印象深刻的进步
impressive achievement
令人印象深刻的成就
the pressive force from the clamp held the panels tightly in place.
夹具的压力将面板牢牢地固定到位。
engineers measured the pressive strength of the concrete after seven days.
工程师们在七天后测量了混凝土的抗压强度。
the design relies on pressive stress to keep the arch stable.
该设计依靠抗压应力来保持拱的稳定性。
under pressive load, the column must resist buckling.
在抗压载荷下，该柱必须抵抗屈曲。
the lab applied a steady pressive pressure to the sample for one hour.
实验室将稳定的抗压压力施加到样品上一个小时。
high pressive strain can cause microcracks in brittle materials.
高抗压应变会导致脆性材料产生微裂纹。
the pressive modulus increased after the polymer was cured.
聚合物固化后，抗压模量增加。
they recorded the maximum pressive resistance before the joint failed.
他们记录了在连接失效前的最大抗压强度。
a uniform pressive constraint kept the gasket from leaking.
均匀的抗压约束防止了垫片泄漏。
the simulation showed uneven pressive distribution along the beam.
模拟显示梁沿长度方向的抗压分布不均匀。
with insufficient pressive support, the foam deformed permanently.
如果抗压支撑不足，泡沫会永久变形。
探索常用高频词汇